TL300 - Universal IP Alarm Communicator
The TL300 connects directly to the telephone output of any make or model of alarm control panel. It transmits predefined Contact ID codes to our central monitoring station over the Internet making it the most flexible DSC Communicator on the market.
If you can reliably send signals to the DSC IP Testing web site, then you are ready to connect to our monitoring service and be live in no time at all.
The TL300 is designed for use with non-DSC alarm panels, however, it can just as easily be connected to any model of DSC panel that has a telephone output that supports the Contact ID protocol.
Features
Compatible with most control panels that use the Contact ID format
Instant, always-on IP communication
UL, CSFM and ULC Level 3/4/5 Listed
Compatible with 10/100BaseT networks
4 on-board programmable zone inputs and 2 programmable voltage outputs as stand-alone module
Works over local LAN/WAN network or the Internet
Supports DHCP (dynamic IP addresses)
Low network bandwidth requirements
128-bit AES encryption (NIST approved)
Reports events to 2 different receiver IP addresses
Programmable through the PK5500 LCD keypad or T-Link Console software
Software upgrades via network
Polling and hardware substitution protection